SFN capability of NEXTGEN TV boosts reception robustnessTuesday, June 15th, 2021
Latest Phoenix Field Testing Highlights Ability Of Nextgen TV Single Frequency Network Transmissions To Fill Holes In Reception, Boost Coverage, Open Door For Future Opportunities
PHOENIX, AZ — The Single Frequency Network (SFN) capability of next-generation television can help TV broadcasters greatly enhance robust reception of broadcast TV signals, according to a report on the latest field trials of SFN technology recently completed as part of Phoenix Model Market testing.
“Since last summer, we’ve been testing out various configurations with another NEXTGEN TV transmission tower that can greatly enhance reception and make possible new services such as data sent to both cars and homes,” said Anne Schelle, managing director of Pearl TV, which is coordinating the Phoenix Model Market project. “The results are very encouraging.”
The second Phoenix-area NEXTGEN TV station launched last summer from KASW-TV (CW) using a Single Frequency Network to supplement existing signals in the nation’s 11th largest TV market. KASW-TV is owned by the E.W. Scripps Company (NASDAQ: SSP) and hosts KSAZ-TV (Fox) programming.
“Starting in February, we began a series of tests of the Single Frequency Network broadcast from KASW on physical channel 27. With its primary transmitter about eight miles south of downtown Phoenix and a smaller transmitter on the same physical channel 27 about 18 miles away on Shaw Butte, we were able to determine the impact of how different power levels and polarizations affected reception at various locations around the Phoenix metro area. The robustness of the signal improved. Viewer reception in difficult areas was also improved. Technical coordination between the two transmitters was shown to dramatically enhance what a consumer would be expected to receive,” said Pearl TV Chief Technical Officer Dave Folsom.
Improved Signals Enhance Options
“Our two testing transmission antenna patterns were designed to intentionally overlap each other. Their signals are timed (in frequency and time) such as to interfere with each other in a positive or additive fashion and thus improve viewer’s resultant signal level, service margin and receivability within their overlap area. This is the very basis of a Single Frequency Network’s design. The improvement in signal level and service margin translates into a marked improvement in the additive signal’s signal-to-noise component. That means we can either improve reception or increase carriage bandwidth for more data,” Folsom explained.
The recent testing was devised to test 40 locations in an approximate grid within the system’s transmission overlap area. An omnidirectional test receiver antenna was purposely used in the testing to ensure the reception was taking full benefit of both transmission signals within the overlap area.
Large improvements in signal level and service margin were found in nearly all test locations when the Single Frequency Network nodes were both transmitting. Error-free reception was improved in approximately 80 percent of the sites, according to the test report compiled by broadcast engineering consultants Meintel, Sgrignoli & Wallace as part of the Phoenix Model Market testing program.
“We believe that broadcast TV has the potential to offer a new data delivery service, because of television’s new broadcast standard speaks the same language as the internet itself. A Single Frequency Network arrangement with multiple transmission towers can help broadcasters develop new markets and new opportunities,” Schelle said.
Links: Pearl TV; Phoenix Model Market
- Atmosic SoC approved for Google Android TV remote controls
- Bell Media unveils new and expanded ad solutions
- Irdeto ensures integrity of apps running on OSNtv
- Thales and Netskrt Systems collaborate on inflight VOD streaming
- Samsung chip to power Hyundai in-vehicle infotainment
- Radio Television Hong Kong selects Irdeto multi-DRM solution